Hardness Conversion Digital Barcol Impressor with
Balance Positioning and Bluetooth
Brief Introduction:
iqualitrol Barcol Impressor meets the following ASTM (American
Society for Testing and Materials) standards: E140-97; D2583-75;
B648-78: E140-97 Standard Hardness Conversion Tables for Metals;
D2583-75 Standard Method of Testing for Indentation Hardness of
Plastics by means of a Barcol Impressor; B648-78 Standard Method of
Testing for Indentation Harness of Aluminum Alloys by means of a
Barcol Impressor.
iqualitrol Barcol Impressor is mainly used in aluminum processing
industry. Also, it can be used for glass steel industry.
Features:
1, A digital indentation hardness tester, is the latest design and
development of our company.
2, It is characterized in that provided with a balance positioning,
a digital display of hardness value, and a non disassembly
calibration and adjusting.
3, It is with good stability, convenient calibration, and high
accuracy of detection.
4, Small in size, portable. Single hand operation, easy to use. Can
be used in any occasion as long as the hand can reach.
5, Wide test range, can test from very soft pure aluminum to a
particularly hard aluminum alloy. effective test range equivalent
to the Brinell Hardness of 25~150HB.
6, No need to support. The hardness tester is only tested on one
side of the sample without support.
7, Can be used for measuring not only Barcol Hardness, but also
Brinell Hardness (HB), Vickers Hardness (HV), Webster Hardness
(HW), Rockwell Hardness (HRB/HRE/HRF/HRH).
8, With the maximum hold function, hold the maximum hardness value
during measurement.
9, With the function of calculating the average value, and the
average value of the 29 sets of data are calculated at most.
10, Provide Bluetooth data output choice.
Technical Specifications:
| Range | 0~100Hba,Amount to 25~150HBW |
| Resolution | 0.1HBa |
| Indication Error | 81~88Hba±1Hba |
| 42~48Hba±2Hba |
| Repeatability Error | 81~88Hba±1.5Hba |
| 42~48Hba±2.5Hba |
| Brinell Hardness | √ |
| Vickers Hardness | √ |
| Wenster Hardness | √ |
| Rockwell hardness | √ |
| Maximum Hold | √ |
| Average Calculation | √ |
| Operating Condition | Temperature:0~50ºC Humidity:<80%RH |
| Power Supply | 2x1.5V AAA(UM-4)Battery |
| Dimensions | 170x63x82mm |
| Weight | 390g(Not Including Batteries) |
| Standard | Main Unit |
| Accessories | 2 Pins |
| 2 Standard Blocks |
| Pin Length Calibration Block |
| Screw Driver |
| Spanner |
| Carrying Case |
| Operation Manual |
| Optional | Bluetooth Data Adapter with Software |
