Horizontal Vertical Flammability Tester Vertical Horizontal Burning
Tester with Touch Controller
Application:
When there is a fire around the products, should ensure that it
will not to cause the spread of the fire, horizontal-vertical
burning test simulates electronic products around the environment
in the early condition, using the simulation technology to assess
the fire risk.
The test equipment apply to the electrical and electronic product
components of household appliances, spare parts and components,
such as: household appliances insulation shell, Panel switches,
printed circuit boards and insulation materials and so on.
Brief Introduction:
This Horizontal Vertical Flammability Tester Vertical Horizontal
Burning Tester is suitable for measuring and evaluating the
combustion characteristics of plastic materials.
It was designed and made based on the America UL94standard the
combustion characteristics’ testing of plastic materials used for
device and equipment parts. It tests the horizontal and straight
combustion characteristics of plastic parts used for device and
equipment, and equipped with gas flow meter to adjust size of
flame. It use motor driving mode to make the operation easy and
safe.
The Horizontal Vertical Flammability Tester Vertical Horizontal
Burning Tester use PLC + colorized LCD touch screen or LCD meter to
control, with fine and easy understanding operation interface and
testing data printer, can print the testing conditions and result,
which is convenient to record the testing results. The table size
has several specifications like 0.5, 0.75, and 1 cubic meter.
The special size can be customer-made, you can choose touch screen
control or touch tone control.
Technical Specifications:
| Control system | 7 inches colorized LCD touch screen+ PLC(programmable controller)+
micro printer, or data display instrument |
| Display system | 7 inches colorized LCD touch screen display, can set and display
the time of fire, ignite, after flame, residual burn, and testing
times. It can adjust the up and down of the jig and control the gas
supply and fire. And also can display the print interface and
operation conditions. |
| Cabinet capacity | ≥0.5 cubic meters, with glass watch door |
| Ignite time | 0~99 minutes and 99 seconds can be set |
| After flame time | 0~99 minutes and 99 seconds can be set |
| Residual burn time | 0~99 minutes and 99 seconds can be set |
| Timer | 0~99 minutes and 99 seconds can be adjusted, burning time can be
set, and burning duration can be recorded. |
| Burning angle | 20°,45°,90°(equal to 0°) can be adjusted |
| Burner size parameter | Nozzle diameter Ø9.5±0.3mm, nozzle effective length is 100±10mm,
with air adjust hole. |
| Flame height | It can be adjusted from 20mm to 175mm according to the standard
requirement. |
| Product feature | It is equipped with lighting device, air extracting device, gas
flow regulating valve, product feature gas gauge, gas pressure
regulating valve, gas flow meter, form U gas manometer and sample
jig |
| Power | AC 220V, 50 Hz |
| Item | 500W(5V class ) | 50W(HB/Vclass) |
| Horizontal vertical burning tester | 500W(burning test for V-0,V-1,V-2 classification) | 50W(burning test for V-0,V-1,V-2 classification) |
| Burner Tube | Internal diameter: Φ 9.5mm±0.3mm | Internal diameter: Φ 9.5mm±0.3mm, |
| Burning Angle | 0°,20°,45° | 0°,20°,45 ° |
| Thermocouple | Type K (Ni/Cr - Ni/Al) | Type K (Ni/Cr - Ni/Al) |
| Thermocouple Size | 0.5 mm | 0.5 mm |
| Standard Copper Block | Φ9mm±0.01mm, weight:10g±0.05g before drilling. | Φ5.5mm±0.01mm, weight.76g±0.01g before drilling. |
| Time for Temperature to Increase | From 100°C±5°C to 700°C±3°C; 54s±2s (preset) | From 100°C±5°C to 700°C±3°C; 44s±2s (preset) |
| Gas Flow | 965±32ml/min | 105±10ml/min |
| Gas Supply | methane,min.98% purity | methane,min.98% purity |
| water-column | 125m±5mm | ‹10mm |
| Test Time | 54±2s | 44±2s |
| Flame Height Indicator | 40±1mm | 20±1mm |
| Volume Of Chamber | >0.5m³, black interior | >0.5m³, black interior |
| standards | IEC60695-11-3, IEC60695-11-20 | IEC60695-11-4, IEC60695-11-10 |
