Digital Portable Hardness Tester Indentation Barcol Hardness Tester
For Testing Aluminum
Brief Introduction:
iBar-H2 a digital indentation hardness tester, characterized in
that provided with a balance positioning, a digital display of
hardness value, and a non disassembly calibration and adjusting.
With good stability, convenient calibration, and high accuracy of
detection. It is mainly used in aluminum processing industry,
testing pure aluminum, soft aluminum, thick aluminum alloy,
aluminum strip, aluminum rod, aluminum castings, aluminum forgings
and aluminum alloy products. Also, it can be used for glass steel
industry.
The relevant standard is ASTM B648-00, ASTM HD2583-07, and GB / T
3854-2005.
Features:
Small in size, portable. Single hand operation, easy to use. Can be
used in any occasion as long as the hand can reach.
Wide test range, can test from very soft pure aluminum to a
particularly hard aluminum alloy. effective test range equivalent
to the Brinell Hardness of 25~150HB.
No need to be supported. Just test on one side of the sample with
the hardness tester, no need to be supported. It is suitable for
the test of large and extra thick workpiece.
With the maximum hold function, recording the maximum hardness
value during measurements, and the function of calculating the
average value, can calculate the average value of the 29 sets of
data at most.
Can be used for measuring not only Barcol Hardness, but also
Brinell Hardness (HB), Vickers Hardness (HV), Webster Hardness
(HW), Rockwell Hardness (HRB/HRE/HRF/HRH).
Technical Specifications:
| Parameters | Barcol Hardness (Hba), Brinell Hardness (HB), Vickers Hardness
(HV), Webster Hardness (HW), Rockwell Hardness (HRB/HRE/HRF/HRH) |
| Measurement Range | 0~100 HBa, equivalent to the Brinell hardness of 25~150HB |
| Resolution | 0.1 HBa |
| Indication Error | 81~88 HBa±1 HBa |
| 42~48 Hba±2 HBa |
| Repeatability Error | 81~88 HBa±1.5 HBa |
| 42~48 HBa±2.5 Hba |
| Operating Condition | Temperature: 0~50°C |
| Humidity:<80%rh |
| Size | 170x63x82 mm |
| Power Supply | 2x1.5vAAA Um-4 Battery |
| Weight | 390g (Not Including Batteries) |
Standard Delivery:
| Standard Accessories | Main Unit |
| 2 Pins |
| 2 Standard Blocks |
| Pin Length Calibration Block |
| Screw Driver |
| Spanner, |
| Carrying Case |
| Operation Manual |
| Optional Accessories | Bluetooth data output |
