Automatic Large Capacity Metallographic Sample Cutting
Machine Max Cut Section 300x150 mm
Technical Data Download:
iqualitrol Metallographic Cutting Machine iCut-414
Brief Introduction:
The iqualitrol iCut-414 is a PLC controlled automatic
metallographic sample cutting machine, X/Y/Z directions controlled
automatically and precisely, intelligent cutting, the amount of
feed can change depending on the material’s hardness, to achieve
the fastest cutting effect. Cutting speed frequency conversion
control, has very high reliability and control ability.
Technical Specifications:
| Model | iCut-414 | iCut-415 | iCut-416 |
| Control method | Manual / Automatic, three axis linkage,
10 inch touch screen control, Can be switched to the operating
handle wheel |
| Feature | Automatic drain system, alarm system, double LED lighting, red
cursor position |
| Feeding speed | 3mm/min, 5mm/min, 8mm/min, 12mm/min (users may modify the set speed
according to requirement) |
Cutting disc
diameter | Ø380xØ32x2mm | Ø400xØ32x3mm | Ø400xØ32x3mm |
| Work table dimension (X*Y) | 450x350 mm | 485x400 mm | 530x630 mm |
| Y axis maximum travel distance | 250 mm | 300 mm | 420 mm |
| X axis maximum travel distance | 100 mm | 100 mm | 110 mm |
| Z axis maximum travel distance | 160 mm | 230 mm | 230 mm |
| Max. cutting cross section | 120x100 mm | 200x120 mm | 300x150 mm |
| Fixture caliber | 120 mm | 200mm | 300 mm |
| Frequency conversion motor | 5.5kw, Speed: 500-2800 r/min | 7.5kw, Speed: 500-2800 r/min | 7.5kw, Speed:
500-2800 r/min |
| Feeding motor | Servo motor | Servo motor | Servo motor |
| Volume of the water tank | 120L | 120L | 120L |
| Dimensions | 1400x1000x
1850mm | 1550x1100x
1900mm | 1650x1350x
1900mm |
| Weight | 1800kg | 2200kg | 2500kg |
Main Features:
- Manual/Automatic Cutting mode exchangeable
- Touch screen displays various cutting data.
- Precise positioning.
- Swing cutting and continuous cutting two cutting ways, according to
the material’s hardness, it can change the cutting speed, to
achieve the fast cutting effect.
In order to facilitate cutting room cleaning and security of the
spindle motor, the machine adopts electro-mechanical dissociation.
There is a large observation window on the cutting room security
cover, makes the user easy to observe the entire process of cutting
samples.
Installed LED lights in the cutting room, it achieves effective
lighting for the entire area of the cutting room.
Cutting indoor ventilation fan can ensure the efficient flow
discharge of various steam and smoke caused by the cutting and
increases the indoor brightness and clarity.
The design is more humane and adopts the principle of ergonomics.
The most important feature: Low noise, easy to operate, beautiful
appearance, safety use. It is one of the best equipment for
laboratory sample preparation.
The body form: vertical. Mainly composed of upper (safety cover),
middle (frame), right sliding door, side door, the lower frame
(electrical box, tool box), fixture, rinsing tap, cooling water
tank (independent).
It adopts frequency conversion motor, direct cutting disc, stepless
speed regulation, concise design and solid structure. The direct
driving provides the transmission between the motor and the cutting
disc, and ensure the high efficiency, low noise, minimum
maintenance and longer service life.
Design of special cutting for large workpieces, it makes the
maintenance of machine parts and processing of large workpieces
easier. Sliding door and hinged door makes you have more space and
unlimited access, more convenient for you to place the large
workpiece in the right position. You can put the workpiece into the
cutting room from three directions (up, front and left).
The work area adopts fully enclosed structure and a transparent
protective cover for the observation of cutting. Equipped with a
cooling water tank for storing cooling liquid, do avoid using tap
water as cooling liquid. After the cutting work is finished, use
the left rinsing tap to rinse the indoor garbage and then close the
safety door.
