Quick Clamp Device Multifunctional Manual Metallographic Cutting
Machine with Water Cooling
Brief Introduction:
iqualitrol iCut-405 multifunctional cutting machine mainly used to
cut irregular metallographic sample materials such as round
cylinder and polygon and protruding platforms, etc.
iqualitrol iCut-405 adopts double-shell totally closed structure
and quick clamp device, can guarantee cutting under absolutely safe
status.
Sample thickness can be changed arbitrarily, and the speed of
entering is controllable.
In order to avoid sample organization burns during cutting,
iqualitrol iCut-405 comes with strong cooling system, can avoid
even little burn of the sample surface while cutting and falling.
The machine has advantages in operation and maintenance; it is the
extremely good apparatus for cutting irregular sample materials.
Technical Specifications:
| Cutting Section | Diameter 65mm for cylinder samples 65*100mm for cube samples |
| Rotation Speed | 2800rpm |
| Cutting Wheel | 250 x 1.5 x 32mm |
| Motor | 1.2KW, AC380V/50Hz/3Ph |
| Dimension | 700 x 520 x 1110mm |
| Net Weight | 350Kg |
Operation of Cutting Machine:
When cutting a specimen from a larger piece of material, care must
be taken to ensure that it is representative of the features found
in the larger sample, or that it contains all the information
required to investigate a feature of interest.
One problem is that preparation of the specimen may change the
microstructure of the material, for example through heating,
chemical attack, or mechanical damage. The amount of damage depends
on the method by which the specimen is cut and the material itself.
Cutting with abrasives may cause a high amount of damage, while the
use of a low-speed diamond saw can lessen the problems. There are
many different cutting methods, although some are used only for
specific specimen types. iqualitrol provides the iCut-864 low speed
diamond saw for cutting OM (optical microscope), SEM (scanning
electron microscope), and even TEM (transmission electron
microscope) specimen.
