Vertical Large Capacity Automatic Metallographic Cutting Machine
with Recycling Water Cooling
Brief Introduction:
iqualitrol LQ-110Z automatic metallographic cutting machine is a
vertical large-scale metallographic cutting machine designed and
manufactured according to the principle of safety and environmental
protection.
It is suitable for cutting samples of various metal and non-metal
materials to observe metallographic materials. Lithofacies
organization. The machine is stable, low noise, easy to operate and
safe to use. It is one of the necessary equipment for laboratory
samples of solid materials.
iqualitrol LQ-110Z is composed of cutting system, cooling system,
lighting system, cleaning system and so on. The upper part of the
device is completely covered by an openable protective cover. The
front of the protective cover is an oversized viewing window.
The high-intensity lighting system allows the operator to keep
abreast of the cutting process. The grooved cast iron table with
clamps is suitable for cutting a variety of profiled workpieces.
The super-cooling system keeps the workpiece from burning when it
is cut. The cooling water tank is placed inside the base of the
equipment. The water tank is equipped with a magnetic separator to
collect debris. The door safety switch and the explosion-proof
guard ensure the safety of the operator.
Technical Specification:
Cutting mode: chopping, flat push cutting
Feed axis feed mode: cut feed, continuous feed, cut feed
Maximum cutting diameter: Φ110mm
Y axis maximum cutting stroke: 200.000mm
Z axis maximum cutting stroke: 150.000mm
Y-axis cutting speed setting range: 1.000mm/s-0.001mm/s
Z-axis cutting speed setting range: 1.000mm/s to 0.001mm/s
Y-axis tool setting speed range: 5.000mm/s to 0.001mm/s
Z-axis tool setting speed range: 5.000mm/s to 0.001mm/s
Grinding wheel specifications: 350 × 2.5 × 32mm
Cooling method: water spray
Overall size: 1060 × 1450 × 1650 (length × width × height)
Power: 380V (three phase) 50HZ
Motor power: 4KW
