Connect Computer Digital Force Gauge Max 2KN
Mass Memory LCD Overturns Show
Brief Introduction:
1. The HF series are digital force gauge with compact size, high
accuracy, they are easy to operate and handy to carry out.
2. Widely applied in electron, high & low voltage electrical
appliance, hardware, automobile parts, lighter and ignition system,
light industry, mechanical, textile, and so on industries for
testing of pull or push load test, insertion force or pull and
destructive experiment.
3. This digital force gauge is new generation pulls.
Features:
1. Connect the computer in-phase test.
2. The compare value set by user’s request.
3. Big memory saving function.
4. LCD overturns show.
5. Auto peak.
6 . Auto power off.
Technical Specification:
| Model specification | HF-2000 | HF-5000 | HF-10K | HF-20K | HF-50K | HF-100K | HF-200K | HF-500K | HF-1000K |
| Peak load value | 2000N | 5000N | 10KN | 20KN | 50KN | 100KN | 200KN | 500KN | 1000KN |
| load division value | 1N | 1N | 0.01KN | 0.01KN | 0.01KN | 0.1KN | 0.1KN | 0.1KN | 1KN |
| 0.1kg | 0.1kg | 0.001kg | 0.001kg | 0.001kg | 0.01kg | 0.01kg | 0.01kg | 0.1kg |
| 0.1lbs | 0.1lbs | 0.001lbs | 0.001lbs | 0.001lbs | 0.01lbs | 0.01lbs | 0.01lbs | 0.1lbs |
| Indication error | ±1% | ±1% |
| Unit | N / (KN), kg / (Mg or t), lb (KIb) |
| Data interface | Rs232 nine-hole socket |
| Power | rechargeable batteries, charger(charging voltage 100V-240V) |
| Sensor structure | S-tye or column sensor with high precision (external sensor) |
| Ambient temperature | 5° C~35° C |
| Transport temperature | -10° C~60° C |
| Relative humidity | 15%~80%RH |
| Working conditions | No hypocenter and corrosive medium |
| Gross weight | 6 kg | 9 kg | 24 kg | 36 kg |
| Size | 280 x 200 x 170 mm | 310 x 260 x 190 mm |
The force gauge has advantages of high precision, easy operation
and carry. What's more, it has kinds of testing modes, convenience
for conner and it can store and input data to computer for
statistical analysis as well as constitutes testers with different
functions, combination with test-beds and clamp.
Users can input local acceleration of gravity value to make test
more precise.
Functions:
1.High precision and high resolution.
2.Five testing modes and three display methods for
selection----enhance testing efficiency to the maximum extent.
3.N (Newton), kg (Kilogram) and Ib (Pound) three measuring units
for selection and conversion.
4.6 digits large screen display.
5.Setting function of gravity acceleration----User can input at
your option the accurate value of gravity acceleration at the using
place so as to make the testing and unit conversion be more
accurate.
6.Max. and min. and comparison value can be setted for statistic
analysis. The buzzer will alarm if exceeding comparison value.
7.Data storage function. 896 testing values can be stored.
8.Data output function. The data can be input into computer through
data line for various analyses.
9.Environmental protection. The device will automatically stop if
no operation within 10 minutes.
10.High quality chargeable power supply. The charging voltage is
avai-lable from 100V to 240V, which can accommodate most areas in
domestic and at abroad. It has also protection functions for short
circuit, leakage and overload.
11.2 sets mounting dimensions, it is applied for most testing
platforms domestically and easy for users to install it to
platform.
12.Special testing function of make-break ability of switch contact
to make the make-break testing be more accurate.
