Carton Box Compression Strength Test Machine Corrugated Box Compressive Fatigue tester

Technical Data Download: iqualitrol Carton compression testing machine

Features of Controller:

1. Can display the test value, the maximum value, with print function;

3 can be fixed force, timing test, after the test is completed, automatic reset;

4. Overload shutdown, emergency stop key, automatic shutdown of specimen damage, upper and lower limit setting automatic shutdown; overload protection, limit protection device.

5. Control mode: Double-bit type (computer host and microcomputer LCD display can be individually tested).

6. Display mode: electronic LCD display and computer display.

Technical Specifications:

Working environment:

1. Room temperature: 25°C;

2. Supply voltage: 220V, the power supply should be reliably grounded;

3. The working environment is clean, there is no strong vibration source, and the host support is stable.

Note: The above parameters are standard models. If there are special requirements, our company can design the most suitable solution according to your requirements!

Safety Devices:

1. Stroke protection: set the protection of the upper and lower limits to prevent over-preset travel;

2. Power protection: The system can set the maximum force to prevent exceeding the sensor calibration value;

3. Emergency stop device: There is an emergency stop at the right side of the base to handle unexpected situations.

Brief Introduction:

The basic equipment (packaging test equipment) for the testing of the compression strength of corrugated boxes is applicable to the compression strength test, compliance test and stacking strength test of various types of corrugated boxes.

Features:

1. After the test is completed, there is an automatic return function that automatically determines the crushing force and automatically saves the test data.

2, three kinds of speed can be set, all Chinese LCD display interface, a variety of units to choose from.

3, can enter the relevant data and automatically convert the compression strength, comes with a package stacking test function; can directly set the power, time, automatic shutdown after the test is completed.

4, three modes of work:

Strength test: Measure the maximum pressure resistance of the box;

Fixed value test: The overall performance of the box can be detected according to the set pressure;

Stacking test: According to the requirements of national standards, it can carry out stacking tests under different conditions such as 12 hours and 24 hours.

Test Standards:

GB/T 4857.4-92 Packaging, Transport Packages, Pressure Test Methods

GB/T 4857.3-92 Packaging, Transport Packages, Static Load Stacking Test Methods

Hardware Performance:

1. 32-bit embedded processing chip, fast instruction cycle;

2. Strain measurement accuracy> 4 files, resolution >20000 yards;

3. The use of software coefficients document calibration (correction). Effective correction of sensor linearity;

4.4 frequency doubled counter for photoelectric encoder, high resolution;

5. Display large-screen monochrome LCD with 192×64 dot matrix, which can display more information;

6.1 RS232 serial port can be connected to other devices;

7.1 Road print parallel port, can be connected to a micro printer or a pin printer;

8.8 control buttons (5 function keys, 3 multiplex keys), simple operation;

9. Display function: the end of the test can automatically display and remember the maximum force during the test;

10. Save output: Up to 20 test results can be recorded.

Standard Delivery:

1. One-year warranty;

2. Random gift paper 2 volumes;

3. A high-precision load sensor;

4. Micro-printer (printable test report).

5 power line 1;

iqualitrol is a professional company to supply quality control instrument and repair service. The main products are industrial video borescope, hardness testers, metallographical instrument, metallurgical microscopes, temperature test chambers, etc.

These are widely used in machinery, mold, metal, rubber, connectors, household appliances, printed circuit boards, medical equipment, and so on.

Our sales and service staff are well trained and experienced. They can give professional advice to customers and recommend suitable equipment according to specific requirement.